Question: When Should I Use 12 Gauge Vs 14 Gauge?

Which is thicker 12 gauge or 14 gauge wire?

The diameter of solid 12 AWG wire is approximately 0.0808 inches (2.053 mm), and 14 AWG is 0.0641 inches (1.628 mm).

Therefore, 12 AWG wire is about 26% thicker and has 59% more cross-sectional area than 14 AWG wire..

What is 14 gauge wire used for?

building wire14 – Wire12 – Wire6 – WireRecommended ForRecommended ForRecommended ForCommon residential wiring: Light fixtures, household receptacles.Common residential wiring: Light fixtures, household receptacles, small appliances.Large household appliances: Central air conditioning, electric furnace.4 more rows

Can I use 14 gauge wire on a 20 amp breaker?

NEC 240.4(D)(3) states that 14 AWG must be protected at 15A. You can not use 14 AWG anywhere on a circuit that has a 20A breaker. If you are putting 15 amp receptacles on a 20 amp circuit with 12 gauge wire, then you MUST use the screw terminals, not the back stab terminals. … Just use the side terminals.

Can you mix 12 gauge and 14 gauge wire on a 15 amp circuit?

wire. It’s perfectly safe to use it. Don’t worry about confusing future workers. … Then, if they have any brains / experience at all, they will see that there is 14 gauge wire hooked up to that 15 amp circuit breaker, so they will know not to upgrade it to a 20 amp breaker.

Can 14 gauge wire be used for outlets?

Yes you may use No. 14 AWG Cu wire for outlets but the Circuit Breaker to protect the circuit should be only 15A. Do not use 20A Circuit Breaker for this circuit. … The circuit should not have more than 10 receptacles.

Should I use 12 or 14 gauge wire?

14-gauge wire is the smallest allowed for the permanent wiring of a circuit. It is rated as able to carry up to 15 amps of current. 12-gauge wire is the next size larger and is allowed to carry up to 20 amps.

Can you use 12 gauge and 14 gauge wire together?

Anyway, the first subject is a bit touchy because it makes it difficult to perform an inspection when all of the wires coming into the panel are 12 but many of the circuits have 14 in them too. There is nothing against code mixing wire size for these circuits as long as the OCPD matches the smallest wire.

How far can you run 14 gauge wire?

50 feetThe following are the maximum lengths of cable you can use while still maintaining a 3 percent voltage drop for the given wire size (AWG) and circuit voltage….For 120-volt circuits:14 AWG50 feet12 AWG60 feet10 AWG64 feet8 AWG76 feet6 AWG94 feetOct 20, 2019

Is it OK to use 12 gauge wire on a 15 amp circuit?

However, 12-gauge wire is acceptable on both 15- and 20-amp circuits, so some electricians use it exclusively when wiring a house.